Load-Bearing Wall Removal Engineering in Texas
PE-stamped beam design and structural plans for load-bearing wall removal — permitted, code-compliant, and delivered fast.
Overview
Removing a load-bearing wall is one of the most common structural modifications in Texas homes — and it requires a PE-stamped engineering plan before any building department will issue a permit. Our structural engineers evaluate the wall, design the replacement beam and support system, and deliver permit-ready drawings in 48-72 hours.
How Load-Bearing Wall Removal Works
A load-bearing wall supports the weight of the structure above it — roof, upper floors, or ceiling joists. Removing it without proper engineering can cause sagging, cracking, or structural failure. Our engineers calculate the loads, design a replacement beam (steel, LVL, or glulam), specify support posts and footings, and stamp the plans for permit.
The process is straightforward: we inspect the wall, determine what it supports, design the replacement structure, and provide PE-stamped drawings your contractor uses for the removal and for permit submission.
- Structural evaluation of the wall to confirm it is load-bearing
- Load calculation for roof, floor, and ceiling loads
- Beam design — steel I-beam, LVL, or glulam selection
- Support column and footing design
- Connection detail and fastener specification
- PE-stamped drawings for building permit
Signs a Wall Is Load-Bearing
Not sure if your wall is load-bearing? Common indicators include: walls that run perpendicular to floor joists, walls that sit directly above another wall or beam below, walls in the center of the home, and exterior walls. However, the only way to know for certain is a professional structural evaluation.
If you're planning an open-concept remodel, call us before demo. We'll determine which walls are load-bearing and design the engineering needed to remove them safely.
Cost of Load-Bearing Wall Removal Engineering
Engineering for a load-bearing wall removal typically costs $500 to $1,500 depending on the span, number of walls, and complexity. This covers the site evaluation, structural calculations, beam design, and PE-stamped drawings. The construction cost (beam installation) is separate and handled by your contractor.
We provide free phone quotes — call (833) 598-1772 with your wall location and approximate span for an estimate.
How It Works
Phone Consultation
Describe your wall and remodel plans. We'll provide a quote and schedule a site visit.
Wall Evaluation
Our PE engineer inspects the wall, attic, and structure to confirm load-bearing status and measure the span.
Beam Design
We calculate loads and design the replacement beam, posts, and footings per Texas building code.
PE-Stamped Plans
You receive permit-ready, PE-signed drawings in 48-72 hours. Submit to your building department and your contractor builds.
Need Wall Removal in Texas?
Call now to speak directly with a licensed engineer. Free assessment, fast turnaround, permit-ready results.
Call (833) 598-1772Wall Removal FAQs
Do I need a permit to remove a load-bearing wall in Texas?+
How much does it cost to remove a load-bearing wall?+
Can any wall be removed?+
What size beam do I need to remove a load-bearing wall?+
Need Wall Removal? Call a Licensed Engineer
Call now to speak directly with a licensed engineer. Free assessment, fast turnaround, permit-ready results.
Call (833) 598-1772